This Simple 4 port Mining PDU designed to work with 208/240 volt @ 30 Amps power. Supports up to 7.2kW of power. Provides 4 C13 ports to power up to 4 mining rigs. Cord made of 10 gauge wire with L6-30 plug type.
We created these to address a simple need of miners. Getting large amount of power to a small number of devices at a low cost. We don’t need switchable ports, or power monitoring, we can do that with our smart breakout board. So we just need a “dumb” PDU, basically a high current power strip. Tripplite makes something close in this, but at over $200 this is not economical. So we took to using some basic building blocks and built a sturdy design. 10AWG cable throughout and fully soldered connections this is built to the same or better quality of the commercial products internally.
This also can be used to convert a typical “dryer” plug you might find in the garage for more efficient 220V240V mining at home.
We built this 4 Port Mining PDU with just 4 Ports to help reduce cost. What we know from mining is that commercial PDUs put 20-30 porting on them and we use 4. So we just kept it basic with 4 Ports.
Please note that each C13 port should only have 15 amps of loan max on it. There are no internal breakers to keep cost down so you need to ensure that this limit is not exceeded.
For Custom needs, contact email@example.com.